7. Clutch Disc/Clutch Plate/Release Bearing/Pilot BearingWhen using a mechanical bellhousing, use a standard 26-spline 10.5- or 11-inch disc and corresponding pressure plate depending on which flywheel you are using. When using a hydraulic bellhousing, the most popular 10.5-inch clutch, pressure plate, and release bearing set seems to be Ram 88730. In my 1986 Monte Carlo SS (462606 bellhousing), I installed a 10.5-inch Hays Street clutch disc, a parts store rebuilt pressure plate, a Hayes release bearing, and a Summit roller pilot bearing. Unless a manual transmission parts car was acquired for the swap, new pressure plate bolts and lock washers are also required.
Originally Released 11 February 2002 updated 27 August 2007 |
Best When Viewed at 1024 × 768 Copyright © 2001-2012 Marc Hichens |